Browsing Mühendislik Fakültesi / Faculty of Engineering by Issue Date
Now showing items 1-20 of 1140
-
Akışkan Gücü Kontrolü Teorisi
(TOBB Ekonomi ve Teknoloji Üniversitesi, 1995)Akışkan gücü kontrol elemanları ve bunların uygulamalarıyla ilgili olarak, gerek akademik çevreler, gerek firmalar tarafından hazırlanmış çeşitli Türkçe eğitim kitapları ülkemizde halen kullanılmaktadır. Bu kitabın amacı ... -
Aircraft Structural Safety : Effects of Explicit and Implicit Safety and Measures Uncertainty Reduction Mechanisms
(University of Florida, 2006)Aircraft structural safety is achieved by using different safety measures such as safety and knockdown factors, tests and redundancy. Safety factors or knockdown factors can be either explicit (e.g., load safety factor of ... -
The frictional contact problem of sliding rigid parabolic stamps on graded materials
(2008-02)This study presents an analytical procedure to determine the contact stress distribution at the surface of an FGM coating perfectly bonded to a homogeneous substrate. The coating is assumed to be loaded by a rigid stamp ... -
Mesoscopic nonequilibrium thermodynamics treatment of the grain boundary thermal grooving induced by the anisotropic surface drift diffusion
(Springer, 2011-09)A systematic study based on the self-consistent dynamical simulations is presented for the grain boundary thermal grooving problem by strictly following the irreversible thermodynamic theory of surfaces and interfaces with ... -
Grain boundary grooving in bi-crystal thin films induced by surface drift-diffusion driven by capillary forces and applied uniaxial tensile stresses
(Taylor & Francis Ltd, 2012)Grain boundary (GB) grooving, induced by surface drift-diffusion and driven by the combined actions of capillary forces and applied uniaxial tensile stresses, is investigated in bi-crystal thin films using self-consistent ... -
Peptides to bridge biological-platinum materials interface
(Ice Publishing, 2012)Peptides with inorganic materials recognition already started to impact a wide range of surface- related technologies ranging from biomonitoring to biomedical areas. Combinatorial biology- based libraries are the initial ... -
Dynamic server allocation for unstable queueing networks with flexible servers
(Springer, 2012-01)This paper is concerned with the dynamic assignment of servers to tasks in queueing networks where demand may exceed the capacity for service. The objective is to maximize the system throughput. We use fluid limit analysis ... -
A criterion for the onset of void coalescence under combined tension and shear
(Pergamon-Elsevier Science Ltd, 2012-07)Depending on the relative positions of voids and on the loading conditions, shear loading components can play an important role in the void coalescence process leading to ductile fracture. Yet, most void coalescence criteria ... -
Comparison of Gross Calorific Value Estimation of Turkish Coals using Regression and Neural Networks Techniques
(Metso,Vale,Tata Steel,ESSAR STEEL,TATA CONSULTANCY SERVICE, 2012-09)Gross calorific value (GCV) of coals was estimated using artificial neural networks, linear and non- linear regression techniques. Proximate and ultimate analysis results were collected for 187 different coal samples. ... -
Modification of Quartz Crystal Microbalance Surfaces via Electrospun Nanofibers Intended for Biosensor Applications
(American Scientific Publishers, 2013-04)The major aim of this study is to increase the performance of mass sensitive biosensor surfaces by making modifications on quartz crystal microbalance (QCM) surfaces via electrospinning and plasma polymerization techniques. ... -
Ceruloplasmin and catalase activites in pseudoexfoliation syndrome and pseudoexfoliation glaucoma
(Türkiye Klinikleri, 2013-11)Objective: Pseudoexfoliation syndrome (PEX) is an age-related systemic disorder primarily with ocular manifestations. PEX is considered as the most common identifiable cause of glaucoma (pseudoexfoliation glaucoma, PEG) ... -
Plasma Modified Membrane for Daily Recovery of Oil from Repeated Frying Operation with Frequent Oil Replenishment
(Springer, 2013-11)Sunflower oil was used for deep frying of potatoes at 170 +/- A 5 A degrees C and for 8 h per day for 5 days in a fryer with an automatic oil filtration system. Three different frying operations were performed: operation ... -
Effects of the correlation model, the trend model, and the number of training points on the accuracy of Kriging metamodels
(Wiley-Blackwell, 2013-11)This paper explores the effects of the correlation model, the trend model, and the number of training points on the accuracy of Kriging metamodels. Gaussian correlation models are found to be superior to exponential and ... -
Sterilization of Food Contacting Surfaces via Non-Thermal Plasma Treatment: A Model Study with Escherichia coli-Contaminated Stainless Steel and Polyethylene Surfaces
(Springer, 2013-12)This study focuses on the utilization of glow discharge technique for the reduction of microorganisms on food contacting surfaces to determine whether non-thermal, low-pressure plasma could provide an effective alternative ... -
Reliability prediction through guided tail modeling using support vector machines
(Sage Publications Ltd, 2013-12)Reliability prediction of highly safe mechanical systems can be performed using classical tail modeling. Classical tail modeling is based on performing a relatively small number of limit-state evaluations through a sampling ... -
Improving Positive Unlabeled Learning Algorithms for Protein Interaction Prediction
(SPRINGER-Verlag Berlin, 2014)In binary classification, it is sometimes difficult to label two training samples as negative. The aforementioned difficulty in obtaining true negative samples created a need for learning algorithms which does not use ... -
Fabrication and modification of composite silica nano test tubes for targeted drug delivery
(Royal Soc Chemistry, 2014)This work describes the use of template synthesis to fabricate multifunctional composite silica nano test tubes for targeted drug delivery. The tubular nanostructures were formed within nanoporous anodized alumina templates ... -
Anemone-like nanostructures for non-lithographic, reproducible, large-area, and ultra-sensitive SERS substrates
(Royal Soc Chemistry, 2014)The melt-infiltration technique enables the fabrication of complex nanostructures for a wide range of applications in optics, electronics, biomaterials, and catalysis. Here, anemone-like nanostructures are produced for the ... -
IEEE 802.11 WLAN Based Real Time Indoor Positioning: Literature Survey and Experimental Investigations
(ELSEVIER Science BV, 2014)Indoor positioning has emerged as a hot topic that gained gradual interest from both academia and industry. Accurate estimation is necessitated in a variety of location-based services such as healthcare, repository tracking, ... -
Why the Names? Anubanini and His Clan in the Cuthaean Legend
(2014)This article is a study of the ancient Mesopotamian literary text known as the 'Cuthaean Legend'. This Naram-Sin legend is known from several versions in the extant cuneiform corpus of texts (Westenholz 1997). The names ...
