Show simple item record

dc.contributor.authorNelissen, W. E. D.
dc.contributor.authorAyas, Can
dc.contributor.authorTekoğlu, Cihan
dc.date.accessioned2019-12-25T14:04:30Z
dc.date.available2019-12-25T14:04:30Z
dc.date.issued2019-03
dc.identifier.citationNelissen, W. E. D., Ayas, C., and Tekõglu, C. (2019). 2D lattice material architectures for actuation. Journal of the Mechanics and Physics of Solids, 124, 83-101.en_US
dc.identifier.issn0022-5096
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S0022509618304721?via%3Dihub
dc.identifier.urihttp://hdl.handle.net/20.500.11851/2870
dc.description.abstractThe Kagome structure has been shown to be a highly suited micro-architecture for adaptive lattice materials, in which selected lattice members are replaced by actuators aiming to create shape morphing structures. It is the combination of in-plane isotropy, high stiffness and low energy requirement for actuation that makes the planar Kagome structure the best performing micro-architecture known to date. Recently, Pronk et al. (2017) have proposed a set of topological criteria to identify other micro-architectures suitable for actuation. In the present paper, four novel lattice topologies are presented which were contrived in light of these criteria. Matrix analysis is performed to reveal the static and kinematic properties of the pin-jointed versions of these four structures. The finite element method is used to determine their stiffness and actuation characteristics. One of the proposed designs is found to match the optimal elastic properties of the Kagome structure, while it requires less energy for (single member) actuation. However, the displacement field induced by actuation attenuates faster than in a Kagome lattice. The presented results also show that the criteria proposed by Pronk et al. (2017) should be refined in two regards: (i) statically indeterminate lattice materials do not necessarily result in high actuation energy and thus should not be ruled out, and (ii) as shown by counterexample, the criteria are not sufficient. (C) 2018 Elsevier Ltd. All rights reserved.en_US
dc.language.isoengen_US
dc.publisherElsevier Ltden_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectCellular solidsen_US
dc.subjectlattice materialsen_US
dc.subjectstatic/kinematic determinacyen_US
dc.subjectshape morphingen_US
dc.subjectactuatorsen_US
dc.subjectfinite element methoden_US
dc.title2D lattice material architectures for actuationen_US
dc.typearticleen_US
dc.relation.journalJournal of the Mechanics and Physics of Solidsen_US
dc.contributor.departmentTOBB ETU, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.contributor.departmentTOBB ETÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume124
dc.identifier.startpage83
dc.identifier.endpage101
dc.contributor.orcidhttps://orcid.org/0000-0001-7383-3909
dc.identifier.wosWOS:000459368300005
dc.identifier.scopus2-s2.0-85054681197
dc.contributor.tobbetuauthorTekoğlu, Cihan
dc.identifier.doi10.1016/j.jmps.2018.09.035
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıtr_TR


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record