Show simple item record

dc.contributor.authorAltaf, Cigdem Tuc
dc.contributor.authorYolacan, Demet
dc.contributor.authorSankir, Nurdan Demirci
dc.date.accessioned2019-12-26T14:53:43Z
dc.date.available2019-12-26T14:53:43Z
dc.date.issued2019
dc.identifier.citationAltaf, C. T., Yolacan, D., and Sankir, N. D. (2019). Decoration of 3D ZnO nanoelectrodes with CuInS2 for solar water splitting. Materials Letters, 236, 710-714.en_US
dc.identifier.issn0167-577X
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S0167577X18318159?via%3Dihub
dc.identifier.urihttp://hdl.handle.net/20.500.11851/2990
dc.description.abstractThis study reports the decoration of zinc oxide (ZnO) nanosheets with copper indium sulfide (CuInS2) via sequential metal deposition and post sulfurization methods for photoelectrochemical solar cell application. The three dimensional (3D) ZnO nanosheets are hydrothermally grown on conductive glass substrates by chemical bath deposition. Then, copper/indium metallic alloy is deposited via magnetron sputtering and annealed at high temperature in the presence of elemental sulfur to form CuInS2 absorber on the surface of 3D nanosheets. Photoelectrochemical measurements indicate that the decoration of CuInS2 layer over the ZnO nanosheets results in significant increase in the photocurrent density to 28 mA cm?2 (at 0.5 V vs Ag/AgCl) leading a remarkable amount of hydrogen generation during solar water splitting process, 1387 ?mol measured at 0 V vs Ag/AgCl under 1 sun-illumination for 4 h. © 2018 Elsevier B.V.en_US
dc.language.isoengen_US
dc.publisherElsevier B.V.en_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectZinc oxideen_US
dc.subjectcopper indium sulfideen_US
dc.subjectheterojunctionen_US
dc.subjectphotoelectrochemicalen_US
dc.subjecthydrogenen_US
dc.titleDecoration of 3D ZnO nanoelectrodes with CuInS2 for solar water splittingen_US
dc.typearticleen_US
dc.relation.journalMaterials Lettersen_US
dc.contributor.departmentTOBB ETU, Faculty of Engineering, Department of Material Science & Nanotechnology Engineeringen_US
dc.contributor.departmentTOBB ETÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümütr_TR
dc.identifier.volume236
dc.identifier.startpage710
dc.identifier.endpage714
dc.relation.tubitakinfo:eu-repo/grantAgreement/TÜBİTAK/MFAG/114F360en_US
dc.contributor.orcidhttps://orcid.org/0000-0002-7004-1217
dc.identifier.wosWOS:000450594300180
dc.identifier.scopus2-s2.0-85056477031
dc.contributor.tobbetuauthorSankır, Nurdan Demirci
dc.identifier.doi10.1016/j.matlet.2018.11.056
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıtr_TR


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record